1 year ago - From R2 type shipnat translation. Select the correct result. Select one: a. R2#sh ipnat translation Pro Inside global Inside local Outside local Outside global ftp 192.168.10.2:76 192.168.50.2:76 192.168.10.1:76 192.168.10.1:76 ftp 192.168.10.2:77 192.168.50.2:77 192.168.10.1:77 192.168.10.1:77 ftp 192.168.10.2:78 192.168.50.2:78 192.168.10.1:78 192.168.10.1:78 ftp 192.168.10.2:79 192.168.50.2:79 192.168.10.1:79 192.168.10.1:79 ftp 192.168.10.2:80 192.168.50.2:80 192.168.10.1:80 192.168.10.1:80 R2# b. R2#sh ipnat translation Pro Inside global Inside local Outside local Outside global https 192.168.10.2:76 192.168.50.2:76 192.168.10.1:76 192.168.10.1:76 https 192.168.10.2:77 192.168.50.2:77 192.168.10.1:77 192.168.10.1:77 https 192.168.10.2:78 192.168.50.2:78 192.168.10.1:78 192.168.10.1:78 https 192.168.10.2:79 192.168.50.2:79 192.168.10.1:79 192.168.10.1:79 https 192.168.10.2:80 192.168.50.2:80 192.168.10.1:80 192.168.10.1:80 R2# c. R2#sh ipnat translation Pro Inside global Inside local Outside local Outside global icmp 192.168.10.2:76 192.168.50.2:76 192.168.10.1:76 192.168.10.1:76 icmp 192.168.10.2:77 192.168.50.2:77 192.168.10.1:77 192.168.10.1:77 icmp 192.168.10.2:78 192.168.50.2:78 192.168.10.1:78 192.168.10.1:78 icmp 192.168.10.2:79 192.168.50.2:79 192.168.10.1:79 192.168.10.1:79 icmp 192.168.10.2:80 192.168.50.2:80 192.168.10.1:80 192.168.10.1:80 R2# d. R2#sh ipnat translation Pro Inside global Inside local Outside local Outside global http 192.168.10.2:76 192.168.50.2:76 192.168.10.1:76 192.168.10.1:76 http 192.168.10.2:77 192.168.50.2:77 192.168.10.1:77 192.168.10.1:77 http 192.168.10.2:78 192.168.50.2:78 192.168.10.1:78 192.168.10.1:78 http 192.168.10.2:79 192.168.50.2:79 192.168.10.1:79 192.168.10.1:79 http 192.168.10.2:80 192.168.50.2:80 192.168.10.1:80 192.168.10.1:80 R2#
1 year ago - What is the OSPF default frequency, in seconds, at which a Cisco router sends hello packets on a multiaccess network?
1 year ago - What are two benefits of using NAT? 1. NAT protects network security because private networks are not advertised. 2. NAT accelerates the routing process because no modifications are made on the packets. 3. Dynamic NAT facilitates connections from the outside of the network. 4. NAT facilitates end-to-end communication when IPsec is enable. 5. NAT eliminates the need to re-address all host that require external access. 6. NAT conserves addresses through host MAC-level multiplexing.
1 year ago - Assuming all configurations for this Lab are all correct as required. If I connect an additional PC to the sw and configured the PC 192.168.1.15 with the correct subnet and gateway, correct dns server and making sure there will be no conflict will it work?
1 year ago - The following access list below was applied outbound on the E0 interface connected to the 192.169.1.8/29 LAN: access-list 135 deny tcp 192.169.1.8 0.0.0.7 eq 20 any access-list 135 deny tcp 192.169.1.8 0.0.0.7 eq 21 any How will the above access lists affect traffic?
1 year ago - Which two characteristics are shared by both standard and extended ACLs? Both kinds of ACLs can filter based on protocol type. Both can permit or deny specific services by port number. Both include an implicit deny as a final ACE. Both filter packets for a specific destination host IP address. Both can be created by using either a descriptive name or number.
1 year ago - What are the two main types of access control lists (ACLs)? Standard IEEE Extended Specialized
1 year ago - Which three features are of OSPF routing protocol? Converge quickly OSPF is a classful routing protocol Identify the best route by use of cost Before exchanging routing information, OSPF routers find out neighbors OSPF is a classless routing protocol
1 year ago - A network associate in Genesis Aerospace Industries has configured OSPF with the command: City(config-router)# network 192.168.12.64 0.0.0.63 area 0 After completing the configuration, the associate discovers that not all the interfaces are participating in OSPF.Which three of the interfaces shown in the exhibit will participate in OSPF according to this configuration statement? 1. FastEthernet0/0 2. FastEthernet0/1 3. Serial0/0 4. Serial0/1.104 5. Serial0/1.103 6. Serial0/1.102
1 year ago - A network associate in Genesis Aerospace Industries has configured OSPF with the command: City(config-router)# network 192.168.12.64 0.0.0.63 area 0 After completing the configuration, the associate discovers that not all the interfaces are participating in OSPF.Which three of the interfaces shown in the exhibit will participate in OSPF according to this configuration statement?
1 year ago - The OSPF Hello protocol performs which of the following 2 tasks? It provides dynamic neighbor discovery. It detects unreachable neighbors in 90 second intervals. It maintains neighbor relationships. It negotiates correctness parameters between neighboring interfaces. It uses timers to elect the router with the fastest links as the designated router. It broadcasts hello packets throughout the internetwork to discover all routers that are running OSPF.
1 year ago - The Answer is known as the network backbone. It is used to provide fault isolation and high-speed backbone connectivity.
1 year ago - Which of the following statement is INCORRECT? Select one: a. When selecting the type of switch, rack units should always be considered. Rack units is the number ports available in the network switch. b. The cost of a switch will depend on number and speed of the interfaces, supported features, and expansion capability c. Network switches must support the appropriate number of devices on the network. d. The capability of the switch to store frames is important in a network where there may be congested ports to servers or other areas of the network. e. The speed of network is the primary concern of the end user
1 year ago - what is the allocated size of a 3d int array with size 10,5 and 6 respectively
1 year ago - procedures are non-essential in C++, hence there can be a source code with no procedures
1 year ago - what is the allocated size of a 3d char array with size 12, 5 and 5 respectively?
1 year ago - what is allocated size of a 3d char array with size 12, 5 and 5 respectively
1 year ago - A network administrator in Stark Industries is trying to add a new router into an established OSPF network. The networks attached to the new router do not appear in the routing tables of the other OSPF routers. Given the information in the partial configuration shown below, what configuration error is causing this problem? Router(config)# router ospf 1 Router(config-router)# network 10.0.0.0 255.0.0.0 area 0
1 year ago - Which two statements are true for OSPF Hello packets? 1. They are used to negotiate correct parameters among neighboring interfaces. 2. They are used to maintain neighbor relationships. 3. They are used to determine the complete network topology. 4. They are used for dynamic neighbor discovery. 5. They are used to flood link-state information to all neighbors.
1 year ago - The network administrator of ABC Supermarket configures the router with the "ip route 172.16.1.0 255.255.255.0 172.16.2.2" command. How will this route appear in the routing table?
1 year ago - Refer to the exhibit. The network engineer in RMSIndustries that is shown wants to use the primary ISP connection for all external connectivity. The backup ISP connection is used only if the primary ISP connection fails. Which set of commands would accomplish this goal.
1 year ago - What are two advantages of static routing over dynamic routing? 1. Static routing is more secure because it does not advertise over the network. 2. Static routing scales well with expanding networks. 3. Static routing requires very little knowledge of the network for correct implementation. 4. Static routing uses fewer router resources than dynamic routing 5. Static routing is relatively easy to configure for large networks.
1 year ago - Refer to the exhibit. The network engineer for the company that is shown wants to use the primary ISP connection for all external connectivity. The backup ISP connection is used only if the primary ISP connection fails. Which set of commands would accomplish this goal.
1 year ago - "Router-on-a-stick" is a method used for communicating inter-vlan using a router.
1 year ago - TRUE or FALSE. A host can be assigned it IP address information in one of the two way. Statically and dynamically assigned. In statistically assigned IP address, the DHCP server provides a valid IP address.
1 year ago - From VTP-CLIENT3 do ping test to VTP-SERVERVLAN 1 ip (192.168.10.1). Is it Unsuccessful?
1 year ago - True or False. The best way to prevent a basic switch spoofing attack is to turn off trunking on all ports, except the ones that specifically require trunking.